1962 - 1967 Chevy II

Disc Brake Conversion and

Front End Rebuilding Reference

Page - 2



Questions? Comments? You can email me, just click here e-mail me

spring and shock out

Remove the spring and shock. Be sure to use the correct tool to remove the spring. I have found that some coil spring compressers do not fit. Remove the spring perch.



Upper a-arm out

Remove the upper A-Arm. You must remove the nuts from inside the engine bay. The bolt heads are pressed in side the arm shaft from the out side.



front end separated

After removing the 7 bolts (per side) that hold the front end on to the fire wall, I seperated the front end off the car. Make sure to properly secure the front and up and be safe!



Passenger Side

I supported the engine and transmission and unbolted it from the body. I secured everthing to the hoist and removed all of the wiring harnesses from the body to move the unit out as one.

<- PAGE 1
<---Back to the Chevy II Nova Main Page
PAGE 3->

shield shield This Nova Webring site is owned by
Denis Petit.

Want to join the Nova Webring?
| Skip Prev | Prev | Next | Skip Next | Random | Next 5 | List Sites |

Site Meter Brakes tapped since January 15, 2001.